Field Office Compliance - Assistance


Assistance ID - 123866
Winnebago Industries, Inc - Forest City - 310270292
605 W CRYSTAL LAKE RD Forest City, IA
Winnebago County

FO 2

Report
File Name File Type File Date Note
Comments
5/10/2022 Wayne Venzke 2:36 PM (2 minutes ago) to me Thanks Isaiah I figured that would be the answer. We will keep it going back to waste treatment. CAUTION: This email originated from outside of the organization! DO NOT follow guidance, click links, or open attachments unless the email is expected and/or you trust the sender. Lary, Isaiah 2:38 PM (0 minutes ago) to Wayne Ok, You could talk with them if you wanted, as it sounded like if the data indicated the wastestream was below limits it might be allowed, (I would check with him further on that though). Sorry for the bad news but you may be able to check with him as it sounds like it would just have to be run by them but that it wasn't an automatic no. (or an automatic yes). Thank you for reaching out to me though. ISAIAH LARY
5/10/2022 Wayne Venzke, Env. Engineer for Winnebago Ind. called to see if they could discharge the water from the filter press on their Aluminum CAPCO pretreatment line to drain instead of to the pretreatment system because it can or will overload their system. Checked with Carl Berg and then Surah Kumar who stated that the filtrate has to go to the treatment system (potential for contaminants), if it was tested below effluent limits they could potentially discharge but would need to check with WW Eng. via a work request which could auth. without permit, auth. with a permit, or not authorize. Lary, Isaiah 2:29 PM (0 minutes ago) to Wayne Hi Wayne, you had called to see if Winnebago could discharge the water from the filter press on the Aluminum CAPCO pretreatment line to drain instead of to the pretreatment system because it can or will overload the system due to the higher removal of water from the filter press (i.e. drier cake). I checked with Carl Berg and then Surah Kumar who stated that the filtrate has to go to the treatment system (potential for contaminants), if it was tested below effluent limits they could potentially discharge but would need to check with Iowa DNR Wastewater Engineering via a work request which could authorize without permit, authorize with a permit, or they could also decide to deny the request and not authorize. Basically they are saying any alteration to the approved treatment system would require a work request and approval. If you have further questions please let me know or you can contact Surah Kumar his number is 515-725-8429. I hope that helps! ISAIAH LARY