The following projects are currently advertised for bids. Interested bidders may find general information about each project, as well as printable actual Contract Documents in PDF format. The general information is the same project description provided to Newspapers and by direct mail solicitations. The Contract Documents include the Drawings and the entire Project Manual. Drawings can be printed on any regular or large format printers. The Project Manual includes Proposal Forms, Front End Documents, General and Supplementary Covenants, and Technical specifications. All these are also completely printable.
Effective October 2009, the Department will no longer be responsible for providing hard copy notice to bidders or addenda to either contractors or plan rooms. An email listserv has been created to communicate electronically with vendors currently on file with the DNR. As a member of this listserv, you will receive electronic notice to bidder information on a regular basis.
To subscribe to this list, click here.
The Department will be utilizing the vendor Beeline and Blue to provide printed copies of Plans and Specifications and Addenda upon request. The department will no longer provide complimentary copies of Plans and Specifications to contractors or sub-contractors after award of the contract. Please visit dfs.beelineandblue.com/iowa or contact (515) 244-1611 for more information.
To access any of these, unless you have already done so, you will need to download and install Acrobat Reader from the Adobe Website.
You may obtain a free download from
Click on the project names below to view the one(s) which interest you.
This project consists of granular roadway maintenance - blading/shaping, spreading new rock, ditch cleaning, shoulder work, the replacement of one culvert and the installation of one new culvert.
ESTIMATED QUANTITIES:
2102 - SPECIAL BACKFILL
6 Tons
2125 - RESHAPING DITCHES - CULVERTS
4 STA.
2125 - RESHAPING DITCHES - SWAIL
2.5 STA.
2127 - RECONSTRUCTION OF ROADBED - BLADING/SHAPING ROADWAY
25.9 STA.
2127 - RECONSTRUCTION OF ROADBED - BLADING/SHAPING SHOULDERS
This project consists of installing one 90 HP axial propeller pump into the existing pump station. Installation includes all necessary hardware, wire, and connections to the existing motor control center.
This project consists of constructing five sediment ponds, three in-lake forebays, mechanically dredging the main lake basin, shoreline armoring, streambank stabilization, and modifying the principal spillway stoplog system.
ESTIMATED QUANTITIES:
Mobilization & Demobilization
1 L.S.
Site Preparation and Clearing
1 L.S.
SWPPP Management
1 L.S.
Over-Excavation, Core Trench
950 C.Y.
Over-Excavation, Embankment Top
1,548 C.Y.
Excavation, Stream Bank Excavation, Haul to BMP 17
1,138 C.Y.
Topsoil, Strip, Stockpiling & Respread
4,898 C.Y.
Existing Structure Removal, BMP 3
1 L.S.
Existing Structure Removal, BMP 7
1 L.S.
Existing Structure Removal, BMP 12
1 L.S.
Earthfill, Embankment & Structure Removal Excavation Fill
